Liquiflo manufactures a complete line of Sub-ANSI centrifugal, both sealled and mag-drive, in addition to a unique air-barrier seal pump.....

 

 

 

 

Centry ® Sub ANSI Centrifugal Pumps

Liquiflo's Centry line of Centrifugal pumps are available in 316 SS or Alloy-C with either Packing, Single Mechanical Seal, Double Mechanical Seal or Mag-Drive configuration.

Features
General:
Depending on the model, the Centry Series centrifugals are available as standard with closed impellers. Closed impellers eliminate axial loads and extend the life of the motor bearings when the pump is close-coupled to the motor. Closed impellers simplify the axial positioning of the impeller, when using close-coupled sealed pumps.

Single Mechanical Seals:
Single mechanical seals are the most economical type of seal to use when leakage is not desired. When properly installed and maintained, these seals will generally give years of trouble-free service.

Double Mechanical Seals:
Double Mechanical seals are also available for the Liquiflo Centry Series centrifugal pumps. This seal configuration relies on a barrier lubrication system to cool and lubricate the seal faces.

Magnetically-Coupled Pumps:
These offer a simple and cost-effective solution to sealing toxic, noxious, crystallizing or most other fluids that present problems for single seals and would therefore require use of a double mechanical seal. magnetically-coupled pumps eliminate the need for cooling loops that are required for double mechanical seals.

 

Endura ANSI Group I and II

Liquiflo's ENDURA ® Pumps are Group I & Group II ANSI-Dimensional Magnetically-Coupled Seal-less Centrifugal Pumps . These pumps were designed to meet the demanding needs of the chemical processing industry but will also handle many pumping applications, including those which require dry-running, pumping solids as well as high-temperature demands.

ENDURA® AB - Air Barrier
Liquiflo's ENDURA ® AB-Series is our Patented Air-Barrier Centrifugal Pump. This innovative revolutionary design was the recipient of the 1995 Vaaler Award. The ENDURA ® AB can run dry indefinitely and handles solids - something no other pump in the industry can do.

The AB , (air-barrier) combines the best features of a standard sealed pump with that of a mag-drive pump, while eliminating the drawbacks commonly associated with these designs. This patented design makes the ENDURA ® AB unlike any other pump in the industry.

How it works:
A gas seal isolates the process fluid from the bearings within a mag-drive pump. The benefit of this design is that the ENDURA ® AB does not rely on the pumpage for lubrication. This allows the use of standard, greased-for-life ball bearings instead of the common sleeve bearings found in all other magnetically driven pumps.

Other Great Features:
   . Can run dry indefinitely
   . Lowest L3/D4 ratio of any pump - 9.3
   . Solids handling up to 40%
   . Close-coupled or power-frame
   . ANSI dimensional for easy change-out
   . Inherent secondary containment
  . No seals to leak

 

Contact us at (513) 985-2566 or pumppro@iglou.com for more information!